Can Hydrogen Peroxide Be Used to Clean AirPods?

You may want to learn how to clean AirPods with hydrogen peroxide if you want to do it safely and properly.

A typical solution for treating wounds, hydrogen peroxide also works well to remove fungus and bacteria from surfaces like walls and floors.

Hydrogen peroxide cleaning may seem reasonable because AirPods may sometimes get rather soiled.

Cleaning AirPods with hydrogen peroxide?

Hydrogen peroxide shouldn’t be used to clean AirPods since it can harm electrical components and delicate materials.

Apple advises using a soft, dry cloth that is lint-free to clean AirPods. If necessary, you may clean non-sensitive AirPods components using normal water or a solution of laundry detergent.

Cleaning delicate components of your AirPods, like as electrical connection points and mesh-covered sections, should be done with extreme caution. Any kind of liquid should not be used to clean these places.

Try to clean your AirPods completely using soft, dry materials like lint-free cloths, brushes, and cotton swabs if they just need simple cleaning.

The most important thing to remember while cleaning AirPods is to be gentle with them.

Although you may have a lot of cleaning supplies like brushes, sponges, and cleaning agents lying about your house, you should avoid using anything that can be excessively harsh, sharp, or abrasive.

While hydrogen peroxide may be excellent for treating wounds, it is often not a good cleaning solution for electronics.

Using hydrogen peroxide on your AirPods might seriously harm them since they contain apertures with metal connections and electrical components.

Additionally, hydrogen peroxide may be too abrasive for certain of the outer components of your AirPods.

Cleaning sturdy objects like kitchen floors, automobile wheels, and bathtubs using abrasive cleaners and equipment may work well, but they may be severely damaging to items like AirPods that contain delicate materials and electrical components.

Even if you don’t have any of the cleaning equipment listed below, you should make an effort to clean your AirPods as simply as possible. Avoid using any materials or tools if you are unsure about their suitability for cleaning AirPods.

The cost of your repairs or replacing any broken components can be more than the total cost of the AirPods.

Cleaning material for air pods

You shouldn’t use a regular towel, paper napkin, or anything else that can create a trail of lint or particles while cleaning.

Although using an ordinary towel to clean everyday objects like tables, chairs, and counters may seem innocuous, the lint that comes off the cloth might get into delicate areas of your AirPods.

Electronic devices like AirPods include connection points and holes that are susceptible to damage from even the smallest amount of dirt or moisture.

Adding foreign chemicals may be quite disruptive since electronic components are primarily designed to operate in a clean, dry environment.

Although keeping your AirPods clean should be a high concern, having AirPods that function properly should always come first.

Soft brush or cotton swab

You should handle the mesh components in your AirPods’ microphone and speakers with extreme care.

Openings in the microphones and speakers lead to delicate electrical components that are necessary for your AirPods to work.

Try carefully rubbing the mesh regions of your AirPods with a soft, dry brush if you are unable to remove any dirt from them.

You might attempt to gently shake or blow on the mesh areas from the side if the brush is unable to thoroughly remove the particles.

To prevent debris from falling into any apertures, avoid blowing straight into the microphone or speakers.

You may use a dry cotton swab to clean a mesh area if it is too tiny for the brush to reach.

When cleaning your AirPods with a cotton swab, be careful not to apply too much power since doing so may cause the cotton swab’s parts to break out.

Lint free cloth

You should avoid using normal towels to clean AirPods and instead use a lint-free cloth that is constantly dry and silky. Some lint-free cloths start off soft, but after time they could stiffen up and become abrasive.

Before cleaning your AirPods if you used a lint-free cloth to clean anything wet, check sure all of the liquid was absorbed by the cloth.

To make sure there are no rough or moist areas, pass your hands through the lint-free cloth a few times.

Make sure there isn’t any dirt or debris from previous cleaning projects still on the surface.

You should be careful not to move any debris that the lint-free cloth may have picked up from one region of your AirPods to another.

You should pay extra attention to any holes in your AirPods that lead to the electrical parts.

Make sure you don’t transfer moisture or dirt from your AirPods’ external components to the metal contact points and internal components.

What Fluids Are Safe For Cleaning AirPods?

Even though you should avoid using liquids whenever you clean your AirPods, you may need to use one sometimes.

If you rub your AirPods too hard when cleaning them with a dry cloth or brush, you risk damaging some portions of them.

You may try washing your AirPods Max’s headband or ear cushions in water or diluted laundry detergent if they are discolored or have a tough stain that is difficult to remove with a cloth alone.

Diluted laundry detergent solution

Using a dry towel may not be enough to clean your AirPods when some regions get very grimy.

It’s possible that your AirPods have a sticky material on them that even water can’t remove.

Make a diluted detergent solution if you want a stronger solution than water.

To make a cleaning solution for the outside of your AirPods, combine 1 teaspoon of liquid laundry detergent with 1 cup of water.

Cleaning may be done similarly to using water, but be careful not to get too much wet on your cloth while rubbing.

Plain water

You could try using plain water first when cleaning your AirPods since it’s less abrasive.

On parts of your AirPods with metal connections, holes, or mesh materials, you should avoid using water.

You may dip your soft, lint-free cloth into some water and wring it out so that it isn’t dripping wet if you want to use water to clean other parts of your AirPods.

All you need is enough moisture in the closet to wash the dirt or other contaminants off of your AirPods.

The cloth should be sufficiently wet to resemble a baby wipe or other pre-moistened wipe.

Run your AirPods in gentle strokes until they are thoroughly clean.

With a separate dry, soft towel that is free of lint, you may dry the cleaned regions.

To make sure there is no moisture on your AirPods after drying them with a dry towel, you should let them air dry for as long as possible.

Leave a Comment